Hobby-Lobby
HOBBY-LOBBY BASEBALL HAT
,
Hobby-Lobby Baseball Cap Red baseball hat with embroidered Hobby-Lobby logo. ...Hobby-Lobby
ULTRA-MICRO T-28 RTF
Like the larger T-28, the Ultra Micro T-28 has plenty of power This exciting Ultra Micro Series edition of ParkZone's wildly popular T-28 Trojan is a must have for any intermediate to experienced pilot. Like the original, it has plenty of performance for sport aerobatics but remains a joy to fly at slower speeds if you want to throttle back and shoot touch and gos. And, like the original, it boasts remarkably scale lines and a great looking U.S. Navy trim scheme. Best of all, this one is small enough to fly in your backyard. A T-28 BNF version is also available. Watch More Hobby Lobby Videos! Click Here Ultra Micro T-28 Trojan RTF Highlights: Comes out of the box completely assembled with Spektrum AR6400 6-Channel DSM2 Receiver/ESC/Servos Unit installed Full 4-channel control - throttle, aileron, elevator and rudder Everything you need to get flying comes in the box- even the batteries ParkZone 2.4GHz transmitter featuring Spektrum DSM2 technology, 120 mAh LiPo Battery, and DC Charger included Landing gear features a steerable nose wheel and can easily be removed for a "retracted gear" look Ultra Micro T-28 Trojan RTF Specs: Wingspan: 16.5 in (419.1mm) Length: 13.6 in (346.1mm) Flying Weight: 1.34 oz (38.0g) Motor Size: 8mm Brushed CG (center of gravity): 32mm back from LE at root Prop Size: 5 x 2.5 (130mm x 70mm) Radio: 4+ Channel DSM2 Transmitter required Recommended Battery: 3.7V 120mAh 1S LiPo Approx. Flying Duration: 6 minutes Experience Level: Intermediate, ,
Like the larger T-28, the Ultra Micro T-28 has plenty ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0 W/DX5E
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 w/DX5e When the rain clouds ...Hobby-Lobby
PHOENIX R/C PRO SIMULATOR V4.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,
Phoenix R/C Pro Simulator V4.0 When the rain clouds are ...Hobby-Lobby
DELUXE TELEMASTER 40 KIT
About the Different Telemaster 40 Kits:, We at Hobby Lobby International appreciate your interest in our new Telemaster 40 Deluxe Kit, Article:, Check out this article on Making the Telemaster Deluxe a Super Duty Tow Plane., Technical Specifications:, Length:, 53-1/2", Wingspan:, 73", Flying Weight:, 6 lbs., Controls:, Ailerons, Elevator, Rudder, Throttle, Wing Area:, 848 sq. in.,
All laser cut Deluxe kit for a great building experience ...Hobby-Lobby
TELEMASTER 40 KIT V2
About the Different Telemaster 40 Kits:, We at Hobby Lobby International appreciate your interest in our new Telemaster 40 Deluxe Kit, Technical Specifications:, Length:, 53-1/2", Wingspan:, 73", Flying Weight:, 6 lbs., Controls:, Ailerons, Elevator, Rudder, Throttle, Wing Area:, 848 sq. in.,
A big leap forward in Telemaster 40 kits 73" wingspan, ...Hobby-Lobby
ULTRACOTE GREEN
Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,
UltraCote Green Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
GREAT PLANES REALFLIGHT 6.5 AIRPLANE INTERLINK MODE 2
| FEATURES | Vastly improved heli physics with features such as |
| Minimum Recommended System | (Note |
| Optimal System | For best graphical performance |
| Interlink Elite Controller | USB Port |
New features of the RealFlight 6.5 include:, TrueView Realistic Lighting offers the visual impact of full-spectrum daylight, colors are brighter, truer and more intense., Options include:, Tip of the Day-Changes daily to offer user new and better ways to use RealFlight., Sound and Motion Physics, props and wheels blur, engine sound changes with RPM, INCLUDES:, One Great Planes RealFlight 6.5 R/C Flight Simulator DVD, REQUIRES:, 3D Accelerated Video with:, 32 MB Dedicated Video Memory, 3D Accelerated Video with:, 512 MB dedicated video memory, Multiplayer Requirements:, Broadband Internet connection, COMMENTS:, Connectors on the InterLink Elite cord and included adapters make the InterLink Elite compatible with the trainer jack on most Futaba and all JR Spektrum, Hitec and Tower Hobbies systems. Special adapters for use with most older Futaba and Hitec systems are availble separately.,
Great Planes RealFlight 6.5 Airplane Interlink Mode 2 This is ...